Glass Splashbacks, Glass Worktops, Glass Doors, Glass Shower Screens, Mirror Manufacturers

01423 566 500

Polished Aluminium Finish Rollertrack

Polished Aluminium Finish Rollertrack
 
Perfect for Showcases and Display Cabinets
Designed for 6 mm Toughened Glass
Smooth Operating Nylon Rollers are Built Into the Lower Track
Simple 'Lift and Drop' Glass Installation
Top Channel Can Be Used as Side Jambs or for a Surround Frame
Polished Aluminium Finish
Available in 2m and 4m lengths

Our new Double Roller Track System is beautifully designed to be both attractive and functional. Everything you need to install sliding glass doors into a showcase or cabinet is included. Just cut the Upper Channel and Lower Track to size and it's ready-to-install.

Smooth operating nylon rollers are spaced every 102 mm in the Lower Track, which has been pre-drilled with holes for securing it to the base. The Top Channel is easily set into place above the Bottom Track, and can even be used as a side jamb to provide a full surround frame for the glass doors.

NOTE: Designed for use with 6 mm toughened glass, the maximum recommended panel size is 1520 mm tall by 790 mm wide, or a ratio of 1.5:1. Recommended minimum overlap of glass panels is 38 mm.

WDCFP : 29mm polished chrome finger pull
Polished Aluminium Rolltrack
Cat. No.DescriptionLengthFinish
WD16780Rollertrack Bottom - 6mm Glass2mPolished AluminiumIn Stock
WD16785Rollertrack Bottom- 6mm Glass4mPolished AluminiumIn Stock
WD16790Rollertrack Top- 6mm Glass2mPolished AluminiumIn Stock
WD16795Rollertrack Top- 6mm Glass4mPolished AluminiumIn Stock
WDCFP29mm Finger Pull-ChromeIn Stock