Laguna Series Single Sliding Door Wall Mount Installation Assembly
- New Anti-Lift Design Assembly Contains All Necessary Hardware to Complete the Installation
- With 10 or 12 mm Toughened Glass Brushed Stainless Steel Construction T
- Suitable in applications where you are attaching a single sliding door to the inside face of a sufficiently reinforced wall.
- The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied)
- The Rollers have a 3.2 mm up or down vertical adjustment to aid in door alignment. This system should only be used with 10 or 12 mm toughened glass
- Laminated glass cannot be used.
| Sliding Glass Door Kits | ||||||||||
| Cat. No. | Description | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| WDLSWM5BS | Single Sliding Door Wall Mount | |||||||||
Single Sliding Door Information
DOOR SYSTEM LIMITATIONS: Maximum Door Weight: 100 kg Maximum Panel Width: 1.36 m Maximum Panel Height: 2.50 m Maximum Track Length: 2.64 m EACH KIT CONTAINS: Two CRL Laguna Series Anti-Lift Top Rollers with Glass Fittings One CRL Laguna Series Top Sliding Tube with End Caps at 2.64 m in Length Five CRL Laguna Series Top Sliding Tube Wall Mount Clamps Two CRL Laguna Series Door Stops (One Left Hand and One Right Hand) One CRL Laguna Series Bottom Floor Guide Complete glass fabrication details and drawings are available by contacting our Technical Sales Department.
NOTE: These Fittings are not for use with laminated glass.