Sidelite and Wall Mount Transom Patch
For 10 or 12 mm Glass
| Door Patch Fittings | ||||||||||
| Cat. No. | Description | Finish | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| WDPH40BS | Transom Patch | Brushed Stainless | ||||||||
| WDPH34BS | Transom Patch | Brushed Stainless | ||||||||
WDPH40 Sidelite Transom Patch
Works with Both 70 mm and 65mm Pivot Setback Door Patch Fittings For 10 or 12 mm Glass The CRL Sidelite Mounted Transom Patch is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with the CRL Ph40A or Ph41A Top Door Patch Fitting. The Insert can also be moved on the non-hinged side, allowing for a double swing door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for top of the door installation.
WDPH34 Wall Mounted Transom Patch
For 10 or 12 mm Glass The CRL PH34 Wall Mounted Transom Patch is used to support a transom from a side jamb. It includes the INT300 Insert for mounting a door with the CRL Ph40A or Ph41A Top Door Patch Fitting. The Insert can also be moved on the non-hinged side, allowing for a double swing door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for top of the door installation.Glass Fabrication Required: One 3/4 inch (19 millimeter) Diameter Hole and Corner Notch.