Sidelite Transom Patch with Support Fin Bracket and Insert
- Works with 70 mm and 65 mm Pivot Setback Door Patch Fittings
- Suitable for 10 or 12 mm Glass
- Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel
- Includes WD1NT300 Insert for mounting a door with a WDPh41A Top Door Patch Fitting
- For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door
| Door Patch Fittings | ||||||||||
| Cat. No. | Description | Finish | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| WDPH41LBS | Left Transom Patch | Brushed Stainless | ||||||||
| WDPH41RBS | Right Transom Patch | Brushed Stainless | ||||||||
A WD1NT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a WD1NT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a WDPH92 Ceiling Mounted Support Fin Bracket. If the weight of the transom exceeds 45kg the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. GLASS FABRICATION REQUIRED: Five 22mm dia. holes and two corner notches COMES WITH: Template and Instructions