Top Door Patch Fitting with WD1NT303 Insert
- 65mm Pivot Setback High Density Cast Body For 10 or 12 mm Glass
- The CRL Top Door Patch Fitting includes the 1NT303 Insert for use with our CRL9040WBP Top Walking Beam Pivot, 1NT401 Surface Mount Top Pivot, 1NT405 Threaded Top Pivot, or other 15 mm Diameter type pivots
- Finished covers are available in four standard finishes
- Gaskets are supplied that allow this Patch Fitting to be used with either 10 or 12 mm Glass
| Door Patch Fittings | ||||||||||
| Cat. No. | Description | Finish | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| WDPh41ABS | Top Door Patch | Brushed Stainless | ||||||||
| WD1NT300 | Insert | N/A | ||||||||
| WD1NT303 | Insert | N/A | ||||||||
| WD1NT303R | Insert | N/A | ||||||||
The following guidelines are to be used when making a door using this hardware: Maximum Height: 2591mm Maximun Weight: 88kg Maximum Width: 1092mm If the door exceeds any of these limitations, full door rails should be used. GLASS FABRICATION REQUIRED: One 19mm Diameter Hole and Corner Notch COMES WITH:Template and Instructions