For Use with Top Door Patch Fittings Mounts in masonry or metal header This CRL Header Mounted Free-Swinging Top Pivot is secured in masonry, or to metal, to allow for a free-swinging pivot. For use with Patch Fittings such as WDPh41 or any Top Pivot with a 15 mm diameter hole. Secure in masonry with the included brass masonry anchor, or secure to metal in a tapped 8 mm threaded hole.

For Use With: WDPH34, WDPH40, WDPH41L, WDPH41R, WDPH42L, WDPH42R and WDPH51 Transom Patch Fittings The WD1NT300 Top Pivot Insert is reversible. When used with the International Series Transom Patch Fittings, it allows for the use of either Cat. No. Ph40A American 2-3/4″ (70 mm) pivot setback or Cat. No. Ph41A European 2-9/16″ (65 mm) pivot setback Top Door Patch Fittings by simply turning the Pivot Insert around in the Transom Patch Fitting. This Top Pivot Insert is used in a variety of Transom Patch Fittings to provide a top pivoting pin to which the Top Door Patch Fitting connects. INCLUDES:1 Each: WD1NT300 Top Pivot Insert; 2 Each: Hex Head Cap Screws for Attaching Insert to Transom Patch